Description
A compact and versatile ESP32-C3 OLED Development Board featuring a built-in 0.42-inch OLED display, onboard ceramic antenna and USB Type-C connection.
Powered by the ESP32-C3FN4/FH4 microcontroller design, this development board includes 4MB of onboard flash memory and supports 2.4GHz WiFi and Bluetooth Low Energy (BLE) 5.0 wireless connectivity.
The integrated OLED screen provides a convenient way to display information, sensor readings, status messages and project data without requiring a separate display module.
With its compact SuperMini design, low-power capabilities and range of peripheral interfaces, this board is ideal for IoT projects, smart home devices, wearable electronics, wireless sensors and embedded development.
The USB Type-C interface supports board power and communication with a computer, making programming and development straightforward.
Product Details
- Product: ESP32-C3 OLED Development Board
- Microcontroller: ESP32-C3FN4/FH4
- Flash Memory: 4MB
- Display: Integrated 0.42-inch OLED
- Wireless Connectivity: 2.4GHz WiFi and Bluetooth LE 5.0
- WiFi Standard: IEEE 802.11 b/g/n
- Antenna: Onboard ceramic antenna
- USB Connection: USB Type-C
- Operating Voltage: 3.3Vā6V (as specified by supplier)
- GPIO: 11 x GPIO (PWM capable)
- ADC: 4 x ADC channels (as specified)
- Interfaces: I2C, SPI and 2 x UART
- Indicators: Blue LED connected to GPIO8
- Controls: BOOT (download) and RST (reset) buttons
Key Features
- Integrated OLED Display: Built-in 0.42-inch OLED screen for displaying project information, readings and device status.
- ESP32-C3 Processor: Compact and capable microcontroller platform with 4MB flash memory.
- WiFi Connectivity: Supports 2.4GHz IEEE 802.11 b/g/n wireless networking.
- Bluetooth LE 5.0: Suitable for low-energy wireless communication with compatible devices.
- Ceramic Antenna: Onboard antenna for convenient wireless connectivity without an external antenna.
- USB Type-C: Used for board power and connecting to a computer for programming and communication.
- Multiple Interfaces: Supports I2C, SPI, UART and GPIO connections for connecting sensors and other peripherals.
- Compact SuperMini Design: Ideal for projects where space is limited.
- Low-Power Capability: ESP32-C3 supports low-power operating modes for battery-powered applications.
What’s Included
- 1 x ESP32-C3 OLED Development Board with 0.42-inch OLED Display
Great For
- Arduino and ESP32 development projects.
- Internet of Things (IoT) applications.
- Smart home automation.
- Wireless sensors and monitoring systems.
- Wearable electronics.
- Compact WiFi-enabled devices.
- Bluetooth Low Energy projects.
- Displaying sensor readings and device status.
- DIY electronics and embedded development.
Programming & Usage Tips
- The board can be programmed using compatible ESP32 development environments, including Arduino IDE and ESP-IDF, with the appropriate ESP32-C3 board support installed.
- Connect the board to your computer using a suitable USB Type-C data cable.
- To enter download mode, press and hold the BOOT button (marked BO0), connect the USB cable, then release the button.
- Press the RST button to restart the board or run the uploaded program.
- The onboard blue LED is connected to GPIO8.
- Check the pinout and voltage requirements before connecting external sensors or modules.
Important: The ESP32-C3 uses 3.3V logic. Do not connect 5V logic signals directly to its GPIO pins. The USB connection and stated input voltage range should also be checked against the board manufacturer’s documentation before powering the board.




