2.0mm Desoldering Braid Solder Remover Wick 1.5M

£3.99

Out of stock

Description

A high-quality Desoldering Braid Wick designed for quickly and effectively removing unwanted solder from printed circuit boards (PCBs), electronic components and soldered connections.

This solder removal wick uses fine copper braiding to absorb molten solder through capillary action when heated with a soldering iron.

It is ideal for cleaning solder pads, removing excess solder and desoldering electronic components during repair, maintenance and DIY electronics projects.

2.0mm wide, and 1.5 metre length, making it a useful addition to any electronics workbench or soldering toolkit.

Product Details

  • Product: Desoldering Braid / Solder Removal Wick
  • Type: Copper Desoldering Braid
  • Available Widths: 2.0mm
  • Length: 1.5 metres
  • Function: Removes unwanted molten solder
  • Application: PCB repair and electronic soldering work

Key Features

  • Effective Solder Removal: Absorbs molten solder from circuit boards and electronic connections.
  • Fine Copper Braid: Designed to draw molten solder into the braid through capillary action.
  • Width: 2.0mm.
  • Convenient Length: Supplied in a 1.5 metre length.
  • Easy to Use: Simply place the braid over the solder and apply a heated soldering iron.
  • Versatile: Suitable for electronics repairs, PCB rework and general soldering tasks.

What’s Included

  • 1 x 2.0mm Wide 1.5m Desoldering Braid

Great For

  • Removing excess solder from PCB pads.
  • Desoldering electronic components.
  • Cleaning solder bridges between circuit-board tracks.
  • Removing solder from through-hole components.
  • Electronics repairs and maintenance.
  • DIY electronics and hobby projects.

Usage Tips

  • Place the desoldering braid directly over the solder you wish to remove.
  • Position the tip of a heated soldering iron on top of the braid.
  • Allow the molten solder to be absorbed into the copper braid.
  • Lift the braid and soldering iron away together once the solder has been absorbed.
  • Cut off the used section of braid before continuing.

Tip: For best results, use a little additional flux if required. Avoid excessive heat or prolonged contact with the PCB, as this can damage copper pads or circuit-board tracks.