6 in stock

SKU: USBASP USB ISP Programmer Category: Tags: , , , , , ,


This programmer is based on Thomas Fischl’s USBasp design and connects to your computer’s USB port.

The USB interface is achieved by using an atmega processor and the rest is done in firmware.

The latest firmware code can be downloaded from the USBasp Website

Support for AVRDude from version 5.2 onwards allows you to to read or write the microcontroller EEPROM, firmware, fuse bits and lock bits

Support for Linux, Mac OS X and Windows (will work on vista) 5 KB/sec maximum write speed Software controlled SCK option to support targets with low clock speed (< 1.5MHz)

10 pin ISP interface These programmers are a perfect companion to the Protostack 28 pin AVR Development Board or the Protostack ATMEGA8 Development Kit.

Chip I/O must be 5V tolerant

To switch between 3.3V or 5V operation, move the jumper JP2 to the appropriate position.

The jumper JP1 (next to JP2) is only used if upgrading firmware on the USBASP itself (which requires a second ISP programmer).

The jumper JP3 is used to force the clock to a very slow rate, and is rarely necessary.

  • USBasp compatible programmer
  • 10way IDC cable
  • Onboard ATMega8 (L)
  • Onboard over-current protection
  • Supported microcontrollers include :-

Mega Series ATmega8 ATmega48 ATmega88 ATmega168 ATmega328 ATmega103 ATmega128 ATmega1280 ATmega1281 ATmega16 ATmega161 ATmega162 ATmega163 ATmega164 ATmega169 ATmega2560 ATmega2561 ATmega32 ATmega324 ATmega329 ATmega3290 ATmega64 ATmega640 ATmega644 ATmega649 ATmega6490 ATmega8515 ATmega8535 Tiny Series ATtiny12 ATtiny13 ATtiny15 ATtiny25 ATtiny26 ATtiny45 ATtiny85 ATtiny2313
Classic Series AT90S1200 AT90S2313 AT90S2333 AT90S2343 AT90S4414 AT90S4433 AT90S4434 AT90S8515 AT90S8535
CAN Series AT90CAN128 PWM Series AT90PWM2 AT90PWM3

Additional information